Aurora Presto

Aurora Presto is a hand-held tester with multi- layer capabilities for testing Physical, ADSL2, ADSL2+, READSL SHDSL, ADSL over ISDN/POTS, ATM, PPP, IP and application layers, such as Internet download testing. It provides all the functions needed to install, maintain and troubleshoot Asymmetric and Symmetrical Digital Subscriber Lines and services. Internal interface cards provide various optional modem types, data interfaces and TDR/DMM testing capabilities within one unit.

Aurora Sonata

The Aurora Sonata is an all purpose ISDN test tool for field technicians. Available in a Basic or Primary Rate only configuration or as a combined unit, it has all the features needed to identify almost any problem.

Aurora Forte

Aurora Forte is a powerful and flexible tool for testing the Physical, ATM and IP layer operation during the commissioning, maintenance and trouble-shooting of ATM circuits. The tester provides connection to E1, E3, DS1, DS3, ATM25, STM-1/OC-3, STM-4/OC-12 and IMA. Physical and ATM BER testing are included. Aurora Forte can be used with Aurora Presto for multi-layer testing of xDSL. Advanced features, such as AAL support, F4 and F5 OAM, QoS, SVC support and IP Ping over ATM, higher protocol analysis and remote control, ideally suit Aurora Forte to 3G/UMTS Network testing.

With Display

MC2+

The most cost-effective solution for easy while productive service qualification and troubleshooting of ADSL, ADSL2, ADSL2+ and RE-ADSL2. The tester's features include IP ping test, support for ITU-T G.dmt, G.lite and ANSI T1.413, bridged, PPPoA and PPPoE connections, counters for transmitted and received data, line attenuation and noise margin. Extremely light and robust, the MC2+ is one of the smallest and handiest testers in the world.

Multipro SDH

Modular Handheld for SDH/PDH Networks up to 2.5 Gbit/s

Trend Multipro SDH is a powerful solution for transportation and metropolitan networks that meets the ever-increasing market demand for efficient, multitechnology test equipment. The Multipro SDH is handheld and modular tool for installation and maintenance of SDH, PDH and DS-n networks up to 2.5 Gbit/s. This tester checks the signal and reports problems to guarantee proper operation. Long battery life and a rugged design make Trend Multipro a great tool for field work.

Multipro Copper

Copper Pair Qualification Tool for Wideband Services

Qualification and modelling the copper pair is essential to guarantee reliable and error-free Triple Play service. Trend Multipro Copper allows the user to qualify copper lines up to 30 MHz, to determine their suitability for all DSL services including VDSL2 up to Band Plan 30a.

Multipro Triple Play

The Trend Multipro is a new test platform for converged networks, with triple play testing being its launch application. This revolutionary service-oriented testing tool ensures proper end-to-end operation of VoIP, IPTV and Internet access by verifying the service performance as it is experienced by the customer. Powerful yet easy to use, Trend Multipro is the ideal partner for the world’s most demanding operators who are bundling multimedia.

Multipro GbE

Trend Multipro GbE has all the features you need to roll out and troubleshoot Ethernet-based next-generation networks and Triple Play applications.

Thanks to its flexible architecture and dual ports to generate and monitor traffic, the tester can be connected to any point on the network.

The tester has a full range of test functions: cable and fibre verification; multiple-stream traffic generation, filtering and analysis; full Ethernet statistics with graphical representation of results; RFC 2544 benchmarking test; BER testing as well as MPLS, Q-in-Q and Jumbo frame support.

Unipro GbE

Trend Unipro GbE is an easy-to-use test set for the installation and troubleshooting of Ethernet networks operating at 10/100/1000 Mbit/s. With a weight of only 1 kg and a rugged design protected with an impact-resistant rubber boot, this tester is your best choice for field work and heavy indoor/outdoor use.

Trend Unipro GbE is one of the most cost-effective tools in the market to verify converged networks and Carrier-Grade Ethernet. This handheld tester includes a full range of test functions: cable and fibre verification; PoE measurement; traffic c generation, filtering and analysis; RFC 2544 benchmarking test; BERT; IP ping and trace route.

Victoria Combo

Victoria Combo is a future-proof platform for testing optical and metropolitan networks based on a truly modular and stackable architecture. To customize your equipment you can choose between a range of technologies and modules. You can operate Victoria Combo out in the field by using its touch-screen and batteries, or indoors by using a keyboard or mouse and power supply. You can also manage the tester remotely from a computer via a TCP/IP wired or wireless connection.

Victoria Combo NG 2.5G

Next Generation SDH/SONET Network Tester

Victoria Combo NG 2.5G is a high performance tool for testing Next Generation SDH/SONET up to 2.5 Gbit/s. It has all the features needed to speed up the installation and maintenance of new dataware SDH networks in a compact, user-friendly battery operated tester. This new test module enables you to test Ethernet over SDH/SONET metropolitan networks that use Higher and Lower Order Virtual Concatenation, LCAS, GFP.

Victoria Combo 10G

New Revolution in Testing

Test module with 10 Gbit/s interfaces. Includes the same functions as the Victoria Combo 2.5 G, plus programmable frame capture to trace the evolution in the values of management information conveyed by the OH bytes.

Victoria Combo 2.5G

Optical and Electrical Interfaces 2.5G Tester

Test module with optical and electrical interfaces up to 2.5 Gbit/s. Includes a comprehensive set of functions, such as TCM, APS, M/N alarms, G.783 sequences, pointer events, G.82x, M.21xx, channel tests at E1/DS1 levels, frequency deviation and optical power measurement.